Firearm Accessories

Handguard: Us MadeProprietary Barrel Nut IncludedM-Lok System Slides Over Barrel Nut , And Is Locked Up Against Receiver With 6 ScrewsInternal Diameter: 1.34T6 Aluminum BodyTotal Weight Including Barrel Nut Is 10.8 OzTight Fit Up Against Receiver, Which...

Handguard: Us MadeProprietary Barrel Nut IncludedM-Lok System Slides Over Barrel Nut , And Is Locked Up Against Receiver With 6 ScrewsInternal Diameter: 1.34T6 Aluminum BodyTotal Weight Including Barrel Nut Is 10.8 OzTight Fit Up Against Receiver, Which...

Handguard: Us MadeProprietary Barrel Nut IncludedM-Lok System Slides Over Barrel Nut , And Is Locked Up Against Receiver With 6 ScrewsInternal Diameter: 1.34T6 Aluminum BodyTotal Weight Including Barrel Nut Is 10.8 OzTight Fit Up Against Receiver, Which...

All US Made 9mm Upper Receiver US 9″ AIR-LOK Gen 2 Compression Series M-LOK Handguard Crush Washer Kit Does Not Come Assembled 9mm Complete BCG With Barrel Nut & Hardware (GT-9ALC-G2) 1/2 X 36 9mm Slim Flash Can (CONE-FH-S-9) Mil-Spec...

HANDGUARD: US Made T6 Aluminum Body Air Lite Series Proprietary Barrel Nut Included Total Weight Including Barrel Nut Is 8.9 oz!! 5 KeyMod Slots On 3 Sides of Front End Of Handguard  Triangle / Diamond Cuts Throughout Handguard to...

All US Made 9mm Upper Receiver US 7″ AIR-LOK Gen 2 Compression Series M-LOK Handguard Crush Washer Kit Does Not Come Assembled 9mm Complete BCG With Barrel Nut & Hardware (GT-7ALC-G2) 1/2 X 36 9mm Mini Trident Flash Can Mil-Spec...

Multiple Cutouts To Reduce Weight Matte Black Finish Weight Of Stock Shell: 9.4 oz New Heavy Duty Design Contoured Buttplate Accepts QD Sling Swivel On Left Or Right Side Complete With Mil-Spec Buffer Tube, End Plate, Castle Nut, CAR Buffer,...

The Alpha Stock MK2 is versatile enough to work with any AR build. Featuring an innovative locking system. The Alpha is easy to install and remove on the any Mil-Spec buffer tube. The butt-pad profiles angled to accommodate plate carriers and the...

Features: • Includes four imbedded magnets to assist in catching parts and tools that can get lost.• Generous surface areas to lay out parts and prevent marring of finishes.• There are ridges and voids to retain small parts and collects...

Features: • Includes four imbedded magnets to assist in catching parts and tools that can get lost.• Generous surface areas to lay out parts and prevent marring of finishes.• There are ridges and voids to retain small parts and collects...

• Directly Attaches to M-LOK® Handguards at the 3 and 9 O'clock Positions• One-piece locking Sliders with Circular Locking Lugs for Easier Manipulation and Added Rigidity• Lightweight Aircraft Aluminum Construction with a Matte Black...

• Directly Attaches to M-LOK® Handguards at the 3 and 9 O'clock Positions• One-piece locking Sliders with Circular Locking Lugs for Easier Manipulation and Added Rigidity• Lightweight Aircraft Aluminum Construction with a Matte Black...

US Made For 5.56/.223 Cal Anodized Blue Finish 30 Round Capacity Anti-Tilt Follower Aluminum Extreem Tactical llc does not currently support sales of Rifle Magazines greater than 10 rounds to a number of locations, including, but not limited...

US Made For 5.56/.223 Cal Anodized Blue Finish 30 Round Capacity Anti-Tilt Follower Aluminum Extreem Tactical llc does not currently support sales of Rifle Magazines greater than 10 rounds to a number of locations, including, but not limited...

US Made For 5.56/.223 Cal Anodized Blue Finish 30 Round Capacity Anti-Tilt Follower Aluminum Extreem Tactical llc does not currently support sales of Rifle Magazines greater than 10 rounds to a number of locations, including, but not limited...

US Made For 5.56/.223 Cal Anodized Blue Finish 30 Round Capacity Anti-Tilt Follower Aluminum Extreem Tactical llc does not currently support sales of Rifle Magazines greater than 10 rounds to a number of locations, including, but not limited...

US Made For 5.56/.223 Cal Anodized Blue Finish 30 Round Capacity Anti-Tilt Follower Aluminum Extreem Tactical llc does not currently support sales of Rifle Magazines greater than 10 rounds to a number of locations, including, but not limited...

Replacement CR44 volt battery for most light sight/scopes. Direct replacement battery for most of the laser sights that we carry.Includes 5 CR44 battery.

High performance 3V Lithium CR123A battery.  Used in many flashlights and red dot sights. 3V Lithium Battery CR123A High performance electronics battery

BM Part #: BAT-CR2032Voltage: 3 VoltCapacity: 220 mAhType: LithiumHeight: 3.2mmDiameter: 20.0mmShipping Weight: 0.01Lbs (0.16 oz)

Red laser .45 ACP sighting tool Power: 5mW Wavelength: 635/655NM Battery: LR41

Red laser 7.62X39mm sighting tool Power: 5mW Wavelength: 635/655NM Battery: LR41

Red laser 9mm Ruger sighting tool Power: 5mW Wavelength: 635/655NM Battery: LR626

Red laser .223 Remington sighting tool Power: 5mW Wavelength: 635/655NM Battery: LR41

Red laser .30-06 sighting tool Power: 5mW Wavelength: 635/655NM Battery: LR41

Red laser .308 Winchester sighting tool Power: 5mW Wavelength: 635/655NM Battery: LR41

Spring tension bipod for quick withdrawal. Locks securely with multiple points of adjustment, and clamps to the common sling studs on most sporting rifles. An additional sling stud is integral with the design, allowing the shooter to use their sling...

Held open with spring tension, this bipod clamps to virtually any barrel profile to add a simple, easy to install upgrade. Folding out of the way when not in use, it can be quickly brought into action when supported fire is required. •  Clamps...

Perfect for display guns, or shooting your classic belt fed gun out on the range. Durable construction will handle sustained fire, with faithful attention to detail in re-creating this hard to find component. •  Opens to 34.5" X 34.5" X...

Spring tension bipod for quick withdrawal. Locks securely with multiple points of adjustment, and clamps to the common sling studs on most sporting rifles. An additional sling stud is integral with the design, allowing the shooter to use their...

Pintle mount functions as a mounting bracket for the firearm, with a cylindrical bottom piece that mates with the tripod. Compatible with.30 CAL/.50 CAL tripods. •  Fits .30 CAL / .50 CAL tripods•  Parkerized finish•  High...

Spring tension bipod for quick withdrawal. Locks securely with multiple points of adjustment, and clamps to the common sling studs on most sporting rifles. An additional sling stud is integral with the design, allowing the shooter to use their sling...

DOJ approved 4-pin tumbler cable lock can be used with most firearm types. •  Lock has 4 tumblers•  Rubber covered steel cable

Held open with spring tension, this bipod replaces the folding bayonet on most SKS pattern rifles. Folding out of the way when not in use, it can be quickly brought into action to provide supported fire in any condition. •  Clamps directly to...

This kit comes with everything you need to assemble a lower receiver, and install the barrel on a stripped upper for both M4 and M16 pattern rifles. AR LOWER RECEIVER VICE BLOCK •  Allows safe mounting of the lower receiver into a...

The AIM Sports Inc AR Upper Receiver Vise Block helps align and will not crush, distort, or mar the receiver. These Gunsmithing Equipment from AIM Sports Inc are made of solvent resistant polymer construction and allow safe...

Durable, lightweight rail panels for customization of your rail system. Easily installed with steel fittings, fit your accessories to the job at hand with the most modern attachment system on the market. •  Black anodized•  6061 T6...

Cutting edge modular design allows use as a stand alone rail panel, or a light mount for commonly available 1” body flashlights. •  Black anodized 6061 T6 aluminum•  U.S. made steel hardware•  Compatible with Magpul...